The 5.7-Liter HEMI

Auburn Hills, Mich., June 10, 2004 - No other engine in U.S. history has the heritage and recognition of the Chrysler Group HEMI®. While completely re-engineered from the legendary 426 HEMI V-8 that powered Chrysler muscle cars of the 1960s, the two features that earn the new 5.7-liter HEMI power plant its HEMI name are:

• The hemispherically shaped combustion chamber designed to accommodate large valves and put the spark plugs close to the center of the combustion chamber
• The cross-flow valve arrangement that is perpendicular to the crank-shaft centerline

Facts and Features

• In the Chrysler 300C, Dodge Magnum RT and the all-new 2005 Jeep® Grand Cherokee, the 5.7-liter HEMI is equipped with Chrysler Group's Multi-Displacement System (MDS), which turns off four of the cylinders when V-8 power is not needed, giving customers up to a 20 percent improvement in fuel economy.
• The 5.7-liter HEMI engine is an internally balanced pushrod, OHV 90-degree V-8.
• The cast iron block is a deep-skirt design with cross-bolted main bearing caps.
• The aluminum cylinder heads feature two valves per cylinder, hemispherical combustion chambers with dual spark plugs and coil-over-plug ignition.
• An Integrated Air Fuel Module (IAFM) incorporates the function of 26 individual components in the induction and fuel system, thereby reducing cost, weight and engine plant complexity.
• The 5.7-liter HEMI marks Chrysler Group's first application of an electronic throttle control in a rear-wheel-drive vehicle.
• A systematic approach to sealing, using premium elastomeric materials and state-of-the-art practices, helps ensure a leak-free, weep-free engine.
• The power plant's simple and efficient design means servicing and repairs are easier and less costly.

Specifications

• Type and description: Eight cylinders, 90-degree V-type, liquid cooled
• Displacement: 345 cu. in. (5.7-liter)
• Bore x stroke:  3.92 in. x 3.58 in. (99.5 mm x 90.9 mm)
• Valve system: Pushrod-operated overhead valves, 16 valves (eight deactivating, eight conventional when equipped with Multi-Displacement System), hydraulic roller lifters
• Fuel injection: Sequential, multi-port, electronic, returnless
• Construction: Deep-skirt cast iron block with cross-bolted main bearing caps. Aluminum alloy heads with hemispherical combustion chambers
• Compression ratio: 9.6:1
• Power (SAE net): 345 hp (257 kW) @ 5400 rpm, (61.0 hp/L), truck applications; 340 hp (254 kW) @ 5000, passenger vehicle applications
• Torque (SAE net): 375 lb.-ft. (508 Nm) @ 4200 rpm, truck applications; 390 lb.-ft. (525 Nm) @ 4000, passenger vehicle applications
• Max. engine speed: 5800 rpm (electronically limited)
• Fuel requirement: Unleaded mid-grade, 89 octane (R+M)/2 - recommended; Unleaded regular, 87 octane (R+M)/2 - acceptable
• Oil capacity: 7 qt. (6.6L)