Forum Index
Jeep Horizons HomeLinksJeep Horizons Tech Write-upsJeep newsLand useContact

 Watched TopicsWatched Topics   FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

T case question


 
Post new topic   Reply to topic     Forum Index -> Grand Cherokee Forum
View previous topic :: View next topic  
Author Message
PitchBlack88
Member


Joined: 21 Mar 2006

PostPosted: Tue Mar 21, 2006 8:38 pm    Post subject: T case question Reply with quote

I just swaped a 242 for a 249 in my 93 zj. I have limited edition so the shifter plug doesnt match up with my t case from a 87 zj. My shift indicator plug is circular with 4 prongs while the plug that is on the 242 case is rectuangular with 2 prongs. Anyone know how to fix that? Also I used swampy's right up on the swap ( thanks by the way worked great) I left the 242's shift linkage on there and adjusted the linkage, so far so good. One problem tho. I cant shift it. But when i loosen the little 3/4" bolt under the case(the one that has the pin and spring in it) It will shift fine. I am thinking about just just putting some teflon on the bolt and maby 2 washers to give the spring some room to compress. When i tighten it up all the way it won't shift. But when i back it off mnaby 1 or 2 threads it shifts fine. Just wanted to get some info on this.
Thx..
Here is a pic of the plug on the case
well was going to put a pic but cant figure how i have them on my car domain show. My name is pitchblack88 so if you need some pics i have them there on my page.
_________________
Always makin it better
Back to top
View user's profile Send private message
swamp boy
Cherokee Muderator
Cherokee Muderator


Joined: 01 Jan 2004
Location: New Orleans LA.

PostPosted: Wed Mar 22, 2006 6:30 pm    Post subject: Reply with quote

You could probobly splice in the plug for the 242 onto the 249 wires.. But your VIC will not work... (of course it probobly wouldnt work well anyway...LOL..)
_________________
BONE STOCK
Unless you include the sawzall work..

Back to top
View user's profile Send private message Send e-mail Visit poster's website MSN Messenger
Display posts from previous:   
Post new topic   Reply to topic     Forum Index -> Grand Cherokee Forum All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Visit links4jeeps.com for write-ups, forums and clubs




Jeep®, Wrangler, Cherokee, Liberty and Grand Cherokee are copyrighted and trademarked to Chrysler LLC.
jeephorizons.com is not in any way associated with or endorsed by the Chrysler LLC.
All other content is copyright Jeep Horizons 2004-2008.
Tech write-ups Links Discussion board Land use News Site Map Terms of Use

Powered by phpBB © 2001, 2005 phpBB Group