Forum Index
Jeep Horizons HomeLinksJeep Horizons Tech Write-upsJeep newsLand useContact

 Watched TopicsWatched Topics   FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

1987 360 in 79 cj7


 
Post new topic   Reply to topic     Forum Index -> Drivetrain
View previous topic :: View next topic  
Author Message
hutch1200
Member


Joined: 06 Feb 2007
Location: clarks summit,pa

PostPosted: Tue Feb 06, 2007 9:56 am    Post subject: 1987 360 in 79 cj7 Reply with quote

I just scored a nice 1987 360. Cylinders, pistons, heads and crank are good, but the cam bearings fell apart upon removal. I would like to upgrade to a 1500(1800)-5000 rpm type cam. What is the next step up(or 2) in cams that will bolt right in?. This whole non-adjustable rocker thing has me perplexed. I'm ASSUMING I have 1.6 rocker ratios now? I plan on using new lifters/pushrods and rockers, but can I use stock replacements on a mild cam? Or will hi-buck rollers be needed. Any vavletrain info anybody can provide will help me out. Thanx, hutch
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic     Forum Index -> Drivetrain All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Visit links4jeeps.com for write-ups, forums and clubs




Jeep®, Wrangler, Cherokee, Liberty and Grand Cherokee are copyrighted and trademarked to Chrysler LLC.
jeephorizons.com is not in any way associated with or endorsed by the Chrysler LLC.
All other content is copyright Jeep Horizons 2004-2008.
Tech write-ups Links Discussion board Land use News Site Map Terms of Use

Powered by phpBB © 2001, 2005 phpBB Group