Forum Index
Jeep Horizons HomeLinksJeep Horizons Tech Write-upsJeep newsLand useContact

 Watched TopicsWatched Topics   FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

XJ Dana ring & pinion


 
Post new topic   Reply to topic     Forum Index -> Cherokee Forum
View previous topic :: View next topic  
Author Message
01xjsport
Member


Joined: 02 Feb 2008

PostPosted: Sat Feb 02, 2008 9:30 am    Post subject: XJ Dana ring & pinion Reply with quote

I have a 2001 XJ W/a LP standerd ration D30.
I what to re-gear from 3.07 to 3.73.
I'v been on the major gear sights looking for gears, but some say I have a reverse ration or crush sleeve or non-crush sleeve design??
I dont want to buy the wrong gear set. The part #s I have are:
Yukon Gear
YG D30-373
OR
YG D30CS-373CS
Thanks for any help.
Back to top
View user's profile Send private message
Orangeamc13
Got Rev Limiter?
Got Rev Limiter?


Joined: 20 Feb 2006
Location: East Springfield, Massachusetts - U.S.A.

PostPosted: Sat Feb 02, 2008 11:03 am    Post subject: Reply with quote

You have a standard rotation w/ crush sleeve. You'll need a new carrier if you're going to 3.73. The lowest you can go with your carrier is 3.55.
_________________
Underground Jeeps
Back to top
View user's profile Send private message Visit poster's website AIM Address Yahoo Messenger
01xjsport
Member


Joined: 02 Feb 2008

PostPosted: Sat Feb 02, 2008 11:52 am    Post subject: Reply with quote

Thanks, Now is a short pinion like in a TJ or a long
From the cover to the pinion seal its about 9 1/4 in.
Back to top
View user's profile Send private message
Orangeamc13
Got Rev Limiter?
Got Rev Limiter?


Joined: 20 Feb 2006
Location: East Springfield, Massachusetts - U.S.A.

PostPosted: Sat Feb 02, 2008 5:16 pm    Post subject: Reply with quote

? Confused ?
_________________
Underground Jeeps
Back to top
View user's profile Send private message Visit poster's website AIM Address Yahoo Messenger
Brad The Best
Member


Joined: 14 Jan 2007
Location: Kamloops B.C Canada

PostPosted: Sat Feb 02, 2008 11:54 pm    Post subject: Reply with quote

i have a quick question , why would you swap gears in a LP dana 30 . go pick one up a high pinion dana 30 from a wrecker with the gears you already want for less money and less work .
Back to top
View user's profile Send private message Send e-mail MSN Messenger
01xjsport
Member


Joined: 02 Feb 2008

PostPosted: Sun Feb 03, 2008 5:46 am    Post subject: Reply with quote

Brad The Best wrote:
i have a quick question , why would you swap gears in a LP dana 30 . go pick one up a high pinion dana 30 from a wrecker with the gears you already want for less money and less work .

I Looked at about 20+ XJ's they all had 3.07 or 3.55 gears can't. find any of the rare 3.73 or 4.10's. also working a budget (as are most of us) and I can't justify the extra $300+ for a axle I need to re gear. I've been driving w/ 31's and 3.07 gears for about 8 moths and I need to down shift to 4th and sometimes 3rd for slight hills. it sucks..
Back to top
View user's profile Send private message
Toliver09
Member


Joined: 16 Oct 2007
Location: Central Illinois

PostPosted: Sun Feb 03, 2008 7:28 am    Post subject: Reply with quote

4 cyl cherokee's have d35 4.10 gears, almost all 4 cyl xj's do.
Back to top
View user's profile Send private message AIM Address Yahoo Messenger MSN Messenger
01xjsport
Member


Joined: 02 Feb 2008

PostPosted: Sun Feb 03, 2008 8:45 am    Post subject: Reply with quote

Toliver09 wrote:
4 cyl cherokee's have d35 4.10 gears, almost all 4 cyl xj's do.

All the Xj in the local junk yard that I could find had 2.8L and 4.0L's
I know that they were made but, I have never seen a 4 cyl XJ before.
Back to top
View user's profile Send private message
sandmanwv
Member


Joined: 18 Feb 2007
Location: WV

PostPosted: Sun Feb 03, 2008 11:36 am    Post subject: Ring gear & pinion Reply with quote

I just replaced the ring gear & pinion in my rear dana 35, 3.54 ratio. I got them from Drive Line Service for $157.93 delivered http://www.drivetrain.com Wink
Back to top
View user's profile Send private message
Brad The Best
Member


Joined: 14 Jan 2007
Location: Kamloops B.C Canada

PostPosted: Sun Feb 03, 2008 4:18 pm    Post subject: Reply with quote

also 4 banger tj's had 4.10's
Back to top
View user's profile Send private message Send e-mail MSN Messenger
Rodrigo_XJ
Member


Joined: 30 Jan 2008
Location: Canary Islands (SPAIN)

PostPosted: Sun Feb 03, 2008 8:51 pm    Post subject: Reply with quote

Woooow...you´re lucky in the States, here in Spain there are a lot 4 cil. and the 6 cil are more difficult to find. Sad

Regards
Back to top
View user's profile Send private message
01xjsport
Member


Joined: 02 Feb 2008

PostPosted: Wed Feb 06, 2008 7:30 am    Post subject: Reply with quote

Thanks to all, I found out that it is a short pinion as in the TJ's
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic     Forum Index -> Cherokee Forum All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Visit links4jeeps.com for write-ups, forums and clubs




Jeep®, Wrangler, Cherokee, Liberty and Grand Cherokee are copyrighted and trademarked to Chrysler LLC.
jeephorizons.com is not in any way associated with or endorsed by the Chrysler LLC.
All other content is copyright Jeep Horizons 2004-2008.
Tech write-ups Links Discussion board Land use News Site Map Terms of Use

Powered by phpBB © 2001, 2005 phpBB Group