When I
installed my
OME lift
on my 2002 Jeep TJ, I also
installed JKS "Quicker" swaybar disconnects.
We started by
bolting the pin (bottom of the
image) into the axle. Then we installed the U-bracket (at the top) on
the sway bar. A bolt and bushing attach the upper eye of the disco to
the bracket…using loctite on the threads to make sure it does not back
out. After the entire lift install was done and the Jeep was sitting on
level ground, we adjusted the length of the disco's ensuring that the
sway bar was in a level position, connected them at the bottom and
greased the hell out of them.
